3D Printer Build Plates

PEI Build Plate for Anycubic Kobra 3/Kobra 3 Combo - 256x268mm Double Sided Textured PEI Sheet | Ultra-Strong Adhesion for PLA, PETG, ABS, TPU | No Glue Needed | Flexible Magnetic Steel Plate

$22.79 $27.79

• 1【Pro-Grade Adhesion】 Our upgraded textured PEI surface delivers ultra-strong grip for PLA, PETG, ABS, TPU, and more—without glue. Engineered to prevent warping even at lower temps (45-55°C for PLA), yet releases prints effortlessly when cool.
• 2【Universal Filament Compatibility】 Optimized for a wide range of filaments: Print PLA (40-60°C), PETG (70-85°C), ABS (90-110°C), or TPU with confidence. Adjust bed temperature slightly for perfect adhesion (reduce if too sticky, increase for challenging materials).
• 3【Double-Sided & Long-Lasting】 High-quality steel plate with textured PEI coating on both sides—flip and reuse to extend lifespan. Durable and warp-resistant, outlasting standard build surfaces.
• 4【Easy to Use & Clean】 Simply attach to your Anycubic Kobra 3/Kobra 3 Combo’s magnetic bed (not OEM but 100% compatible). Prints pop off when cool; flex the plate gently for stubborn models. Wipe with IPA for maintenance.
• 5【Precision Fit for Anycubic Kobra 3】 Designed specifically for the Kobra 3 series (256x268mm / 10.08x10.55in). Note: This is an aftermarket upgrade, not an Anycubic original—engineered for superior performance at a competitive price.

PEI Build Plate for Anycubic Kobra 3/Kobra 3 Combo - 256x268mm Double Sided Textured PEI Sheet | Ultra-Strong Adhesion for PLA, PETG, ABS, TPU | No Glue Needed | Flexible Magnetic Steel Plate
Size: 256*268mm(10.08*10.55inch)
Both sides are textured PEI sheet
Package included: 1 x double sided pei sheet 256*268mm(10.08*10.55inch)

View full product details »

Textured PEI Bed 310 * 320mm Build Plate PEI Sheet and Magnetic Build Plate Adhesive Ender 3 max PEI for CR-10 V2,CR-10 V3,CR-10S pro,CR-X, CR-10 pro V2,Ender 3 max,Ender 3 max Neo 3D Printers

$27.99 $29.79

• 1 The HICTOP 310*320mm pei bed is combined with 2 parts, a flexible steel platform coated with textured PEI on one side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied
• 2 The HICTOP 310*320mm pei is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed
• 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
• 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
• 5 The size of HICTOP pei sheet is 310*320mm（12.2*12.6inch）, it is applicable with CR-10 V2,CR-10 V3,CR-10S pro, CR-X, CR-10 pro V2, Ender 3 max, Ender 3 max Neo Anycubic Kobra Plus 3D printers

About HICTOP Textured PEI Bed 310*320mm Build plate PEI Sheet and Magnetic build Plate Adhesive Ender 3 max PEI for CR-10 V2,CR-10 V3,CR-10S pro,CR-X, CR-10 pro V2,Ender 3 max,Ender 3 max Neo Anycubic Kobra Plus 3D printers
Size: 310*320mm（12.2*12.6inch）
Package included: 1 x Steel platform with PEI flexible surface
1 x Magnetic bottom sheet with Adhesive

View full product details »

.BambuLab Cool Plate PEI Sheet Double Sided Textured Build Plate for Bambu Lab A1 X1/ X1C/ P1P 3D Printers

$23.79 $26.79

• • 1 Cold Printing Ready – Stronger Adhesion, Lower Temp HICTOP's textured PEI plate provides exceptional first-layer adhesion even at room temperature (about 30°C) for PLA, eliminating the need for high bed heat. For best results, use 40-50°C (lower than standard PEI plates) to avoid over-adhesion. PETG prints perfectly at just 60-70°C—saving energy and time.
  • 2 No Glue, No Warping – Reliable Every Print The high-grip textured PEI surface ensures prints stay flat without curling, even on large models. Unlike smooth plates, it never requires glue or tape—It can print ABS very well.
  • 3 Perfect Fit for Bambu Lab – Hassle-Free Setup Precision-cut 257.5x257.5mm steel plate works flawlessly with Bambu Lab X1/X1C/P1P/A1. Simply place it on the printer’s built-in magnetic bed (no extra base needed)—no QR codes or manual adjustments.
  • 4 Eco-Friendly & Energy Efficient Print PLA/PETG at lower temperatures PLA(30-50°C)/PETG (50-70℃), reducing power use by 30%+ compared to standard high-temp plates. Just clean with isopropyl alcohol to restore adhesion—no wasteful adhesives.
  • 5 Durable & Easy to Use – Bend & Release The flexible steel plate allows easy print removal by gentle bending. The textured PEI coating resists scratches and maintains adhesion over long-term use—wipe clean and reuse.

View full product details »