Bambu Lab P1S Hotend Assembly with Ceramic Heater Removable Hardened Steel 0.4mm Nozzle Hotend Compatible with Bambu Lab P1 Series 3D printers

1. The P1s hotend is compatible with bambu lab P1 Series 3D printers but not X1 Series as the ceramic heaters and thermistors for them are different for them.
2.  It is a bambu Lab complete hotend without hotend cooling fan and clip. The assembled hotend has hardened steel 0.4mm nozzle, the ceramic heater, thermistor, a silicone cover and a wrench.
3. The heat sink, throat, heat block and the removable hardened steel 0.4mm nozzle are assembled. You only need to assemble the ceramic heater and thermistor or keep them for later use.
4. The hardened steel 0.4mm nozzle is removable. You can remove the nozzle with just a wrench and no need to grab the heat sink. It is a great choice if you often change the nozzle.
5. Please heat the Bambu Lab P1S hotend to approx. 260 ℃ when you change the nozzle. It will prevent the hotend from leaking filament. Please take care of your hands for the high temperature.

Description:
About HICTOP Bambu Lab Hotend P1P/P1S Assembly with Removable Hardened Steel 0.4mm Nozzle Hotend for Bambu Lab P1 Series 3D printers.
Package included:

1* bambu hotend with 0.4mm hardened steel nozzle
1* silicone sock
1* 24V ceramic heater and thermistor for bambu lab P1 Series 3D printers
1* wrench
1* thermal grease
1* hardened Steel 0.4mm Nozzle